Advantages of Using

back
ON-SITE PRODUCTION
  • U-PVC Spira Pipe is the only piping system that allows on site production. Due to the application, Spira pipe also allows the pipe to be produced in desired lengths, rapid laying and zero loss.
  • ADVANTAGES OF TRANSPORTATION
  • U-PVC Spira Pipes are stored as profiles on drums and pipes are formed out of these profiles when necessary. Therefore, less storage area is required for the material.
  • ADVANTAGES OF STORAGE
  • U-PVC Spira Pipes are stored as profiles on drums and pipes are formed out of these profiles when necessary. Therefore, less storage area is required for the material.
  • AVAILABILITY OF VARIOUS DIMENSIONS
  • U-PVC Spira pipes are produced between dia 150 mm up to 2600 mm in each 25 mm step. Hence, the most economic diameter is available when required.
  • ASSEMBLING
  • U-PVC Spira pipes have rapid and easy installation, as they can be produced in required lengths without joints on site.
  • HYDROLIC PERFORMANCE
  • U-PVC Spira pipes allow touse smaller diameters than other rigid pipes to flow the same flow rate, since its manning roughness co-efficient (0,008) is lower than concrete pipes.(0.014) (FOR EXAMPLE Ø1000 MM CONCRETE PIPE = Ø800 MM SPIRA PIPE)
  • MECHANICAL PROPERTIES
  • Impact strength and resistance of U-PVC Spira Pipe is very high due to its elasticity modulus. (690 MPa in the long term)
  • ABRASION RESISTANCE
  • Due to its smooth inner surface, U-PVC Spira Pipe has higher resistance than its alternatives in terms of transporting liquid and abrasion effect of material in liquid wastes.
  • back
     Công ty CP TM Và Dịch Vụ Việt Đức
    Văn phòng tại Hà Nội:  33 An Trạch - P Quốc Tử Giám - Q Đống Đa - Hà Nội
    Điện Thoại: ( 04 ) 62948 555 - 0985 082 082
     
    Nhà Máy Sản Xuất: Khu Công Nghiệp Cao An - TT Lai Cách Cẩm Giàng - Hải Dương
     Copyright © 2012 Vamber, All Rights Reserved
    Design by NiemTin JSC